Table of Contents
Advertisement
CONTROLS AND FUNCTIONS
Front panel
,
I
@YA~AHA
NATURAL SOUNO AV RECEIVER
1
:
l--=-~"';;;;;;:=-
'I
@
@2]
o
STANDBY/ON
Turns this unit on, or set it to the standby mode. When
you turn this unit on. you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.
Standby mode
[n this mode, this unit will consume a small amount of
power in order to receive infrared-signals from the
remote control.
8
Remote control sensor
Receives signals from the remote control.
8
Front panel display
Shows information about the operational status of this
unit.
o
INPUT MODE
Sets the priority for the types of input signals (AUTO,
DTS. ANALOG) to receive when one component is
connected to two or more input jacks. Priority cannot be
set when 6CH [NPUT is selected as the input source.
4
o
INPUT
<J /
[>
Selects the input source you want to listen to or watch.
o
VOLUME
Controls the output level of all audio channels.
This does not atlect the OUT (REC) level.
o
6CH INPUT
Selects the audio source connected to the 6CH INPUT
jacks. This audio takes priority over the source selected
with INPUT
<J /
[>
(or the input selector buttons on the
remote control).
o
n
SILENT (PHONES jack)
Allows you enjoy DSP effect for private listening with
headphones. When you connect headphones, no signals
are output to the speakers or the OUTPUT jacks.
o
SPEAKERS AlB
Turns the set of main speakers connected to the A and/or
B terminals on or off.
Advertisement
Table of Contents
