Table of Contents
Advertisement
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn
on this unit (see page 25 for details about the input
mode).
Choices: AUTO, LAST
AUTO
Select this to allow this unit to automatically detect the
type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last
input mode used for the respective source.
•
DIMMER
You can adjust the brightness of the front panel display.
Control range:
-4
to 0
Initial setting: 0
Use this feature to prevent accidental changes to settings
on this unit.
Choices: ON, OFF
Select ON to protect the following features:
• All SET MENU items
• Center, rear speakers, rear center, and subwoofer
levels
• DSP program parameters
Notesl
'~:':".J'::~MJ
• When this item is set to ON, you cannot use the test tone.
• When this item is set to ON, you cannot select any other SET
MENU items.
SET MENU
45
0»
"'0
.
m
C
:zJ~
~~
om
ZC
Advertisement
Table of Contents
