Set The Time & Units - AcuRite 00821SBDI Instruction Manual

Set Time & Units
Press and hold the "SET" button, located on the back of the display unit, to
enter into SET MODE. Once in SET MODE, the preference you are currently
setting will blink on the display.
To adjust the currently selected (flashing) item, press and release the "+" or
"–" buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "SET" button again to adjust
the next preference. The preference set order is as follows:
CLOCK HOUR
CLOCK MINUTE
TEMPERATURE SCALE (ºF or ºC)
You will automatically exit SET MODE if no buttons are pressed for 30 seconds.
Enter SET MODE at any time by pressing and holding the "SET" button.
5