Page 1
Installation & Operating Manual PureFire Wood Burning Fireplace Retro-Fit Device For Masonry & Factory Built Fireplaces P/N AH3143P Revised 8 August 2012 FMI Products LLC 2701 South Harbor Blvd Santa Ana, CA 92704...
Page 2
Congratulations! You have purchased a “State-of-the-Art” EPA Phase II Qualified Emission Control Device for wood burning Fireplaces. The PureFire™ Emission Control Technology from FMI Products LLC is a catalytic system designed especially for wood burning fireplaces. PureFire™ utilizes a patented smoke hood to capture the pollutants from the fire allowing most of the dilution air to bypass the hood and exit through the primary flue system.
Page 3
Factory built Fireplace Retro-Fit Installation FMI Products LLC PureFire Installation The PureFire™ can easily be installed in a factory built fireplace in less than an hour. Four mounting screws will hold the two brackets in place. Then the PureFire™ is simply positioned on the mounting brackets.
Page 4
Factory built Fireplace Retro-Fit Installation FMI Products LLC PureFire Operation The PureFire™ Emission Control System for Wood Burning Fireplaces is an add-on catalytic device that reduces particulate pollution and smoke from wood burning fireplaces up to 80%. It is a passive technology that doesn’t require any power.
Page 5
Factory built Fireplace Retro-Fit Installation FMI Products LLC PureFire™ Fireplace Technology The PureFire™ Emission Control Technology from Clear Skies Unlimited is a catalytic system designed especially for wood burning fireplaces. The PureFire™ utilizes a patented smoke hood to capture the pollutants from the fire allowing most of the dilution air to bypass the hood and exit through the flue system.
Page 6
PureFire retro-fit unit. FMI Products warrants this unit to be free of defects in materials and workmanship for a period of one (1) year from the date of purchase. If the unit should malfunction, it must be returned to the factory for evaluation.
Need help?
Do you have a question about the AH3143P and is the answer not in the manual?
Questions and answers