Options; Rinse; Temp; Other Functions - LG Operating Guide Owner's Manual

How to use washer
I

Options

Option
• Medic Rinse : For best results or for
cleaner rinsing.
Medic Rinse is a 40 degree final rinse.
• Rinse+Spin : This can be helpful in
preventing fresh stains from setting in
fabrics. This is a separate cycle.
• Time Save : This option can be used to
reduce the time of a wash program.
It is best used on lightly soiled loads.
• Intensive : If a normal load is heavily
soiled, "Intensive" option is effective.

Rinse

+
• Rinse +Hold : Adds one more rinse to
the wash, then after rinsing process, the
course is paused and the water is not
drained until start button is pressed again.
• Normal+Hold : The course is paused
until start button is pressed again when
rinse is finished.
++
• Rinse : Adds 2 rinses.
+
• Rinse : Adds 1 rinse.

Temp.

• By pressing the Temp. button the water
temperature can be selected.
- Cold
- 20°C, 30°C, 40°C, 60°C, 95°C
• Water temperature selection is limited in
certain programs.
I

Other functions

Rinse+Spin

1. Press the Power button.
2. Select a cycle.
3. Press the Option button
(Rinse+Spin light up).
4. Press the Start/Pause.
The cycle chosen determines the amount
of Rinses and their duration as well as the
spin during for this function.

Spin Only

1. Press the Power button.
2. Select the spin speed only.
3. Press the Start/Pause.
NOTE
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.

Refresh Cycle

1. Press the Power button.
2. Select the Refresh program.
3. Press the Steam Wash button repeatedly
until the correct number representing the
amount of items (1,2 or 3) is displayed.
4. Press the Start/Pause button.
NOTE
For better performance load 3 item or
less.
When Refresh cycle finishes, laundry
will continue to tumble slowly for up to
30 minutes to prevent wrinkling. You can
open the door during this time by
pressing any button and wait for the
door to release.
23