Control Panel - LG Operating Guide Owner's Manual

How to use washer
I

Control panel

SMARTDIAGNOSIS™ function is
available only for the products with
a SMARTDIAGNOSIS™ mark.
Power Program
button dial
Power
• Press the Power button to turn power on
and off.
• To cancel the Time Delay function, the
power button should be pressed.
Program dial
• Turn the Dial to select the cycle appropriate
to the laundry type.
• Lamp will light up to indicate selected
program.
Start/Pause
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is
needed, press the Start/Pause button.
• When in Pause, the power is turned off
automatically after 4 minutes.
Additional program
• Use these buttons to select the desired
cycle options for the selected cycle.
• Some options may be limited to certain
cycles.
Additional program
buttons
Start/Pause Child
Lock
button
LCD display
1%
1:15
Time Left
Washing
Rinse 3 Temp. 40°C
Option Beep
button On/Off
LCD display
• The display shows the settings, estimated
time remaining, options, and status
messages for your washer.
The display will remain on through the cycle.
Options
• This allows you to select an additional
option and will light when selected.
Language Selection
• English is the default language. Language
can be changed only when LCD is on.
Power On and then press the Time delay
and Steam Wash button simultaneously for
3 seconds until the Select a Language
menu is displayed.
Select a Language
Spin dial
Rinse Temp. Tub
button button Clean
English
Italiano
Español
Deutsch
Português
21