Do you have a question about the 827 and is the answer not in the manual?
Questions and answers
Ken
January 20, 2025
On a very very old 6 X 8 unit how do I change F to Celcius
2 comments:
Ken Pajunen
January 20, 2025
@Ken model 02010-RX
Mr. Anderson
February 4, 2025
To change from Fahrenheit to Celsius on the AcuRite 827 unit:
1. Locate the “ºC/ºF” button on the back of the display unit inside the battery compartment area. 2. Press the button to toggle between degrees Fahrenheit (ºF) and Celsius (ºC).
Features & Benefits: Display ..3 Specifications ......9 Setup ........4 FCC Information ....9 Install or Replace Batteries..4 Customer Support ....10 Temperature Units ....4 Warranty......10 Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits Front of Display Unit Back of Display Unit DISPLAY UNIT 11. How-to-Dress Character Includes 20 different clothing 1. Weather Trend Indicator recommendations based on the weather forecast. Arrow icon indicates the direction the pressure is trending. 12. 12 to 24 Hour Weather Forecast Self-Calibrating Forecasting pulls data 2.
SETUP Install or Replace Batteries AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. The outdoor sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Set Time & Date Press and hold the “SET” button, located on the back of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “+” or “–“...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust.
CLOUDY CLOUDY SUNNY (flashing=severe) View the complete list of icons online at www.AcuRite.com Weather Trend Subtle variations in barometric pressure greatly impact the weather. This weather forecaster displays an arrow icon to indicate the direction the pressure is trending (FALLING, STEADY, or RISING).
33 days. Display screen • Check that the batteries are installed correctly. not working Batteries may need to be replaced. If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. Specifications Outdoor: -40ºF to 158ºF;...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www.
Need help?
Do you have a question about the 827 and is the answer not in the manual?
Questions and answers
On a very very old 6 X 8 unit how do I change F to Celcius
@Ken model 02010-RX
To change from Fahrenheit to Celsius on the AcuRite 827 unit:
1. Locate the “ºC/ºF” button on the back of the display unit inside the battery compartment area.
2. Press the button to toggle between degrees Fahrenheit (ºF) and Celsius (ºC).
This answer is automatically generated