Breville Kinetix Control BBL605 Instruction Booklet page 15

HINTS & TIPS
PROBLEM
Motor doesn't start or blade
doesn't rotate
Food is unevenly chopped
Food is chopped too fine or
is watery
Food sticks to blade and jug
Blender Overloaded
14
EASy SOLUTION
Check that the blender jug and lid are securely into
position.
Check that the 'Power' button and selected function or
speed setting is illuminated.
Check that the power plug is securely inserted into the
power outlet and switched on.
Either too much food is being blended at one time or
the pieces are too large. Try cutting food into smaller
pieces of even size and processing a smaller amount
per batch.
For best results, the food should be chopped into pieces
no larger than 2cm.
Blend for shorter period of time. Use 'PULSE' function
for more control.
The mixture may be too thick. Try adding more liquid
to the mixture and / or use a slower speed.
The Breville Kinetix
®
protection feature. If the motor is being overloaded the
motor will stop and the overload warning icon on the
LCD will start to flash. Once the icon stops flashing the
blender has now cooled down and you will be able to
use the blender as per instructions. At this point the
blender will be in standby mode and you will only need
to press the function / button that you require to start
blending again. However if you have turned the blender
off you will need to switch it back on and only if the
icon has stop flashing commence blending as usual.
• We recommend removing a portion of the mixture,
cutting food into smaller pieces or processing smaller
amounts per batch.
Blender features a motor