Run The Application Software; Hardware Uninstall - Zte MF626 User Manual

2. Install memory card
You can use a compatible MicroSD card to save more data. Only MicroSD card is supported by the
modem and do not use other memory card in the modem. Install MicroSD card in the USB Modem,
if you want to use it.
• Open the MicroSD card cover.
• Insert the MicroSD card into the slot. Make sure the metal contact side of the memory card facing
the modem shown as the following picture.
• Then close the MicroSD card slot cover. The driver of the MicroSD card will installed automatically
when the modem driver is installed.
Note: maximum 2GB MicroSD card is supported
3. Connect the USB Modem to your laptop or desktop PC:
• Connect the USB Modem to the USB port and ensure that it is tightly inserted.
• The modem will be automatically recognized.
• The system will automatically detect and recognize the new hardware and display the new icon
in the desktop status bar, indicating that the computer and the USB Modem have been connected
properly. After a few seconds, the installation program will start automatically.

2.3 Run the Application Software

After the modem is correctly connected, click the "Start -> Programs -> GLOBUL Connection
Manager -> GLOBUL Connection Manager" menu on the laptop or desktop PC to run the
application software.
Or double click the shortcut icon, to run the application software.
After modem initialized, main interface appears. When the standby icon
the modem can work properly.

2.4 Hardware Uninstall

Close the software application then remove the hardware following the procedure below.
– Firstly click the "close" button on the menu, and then click "OK" to close the software.
appears in the taskbar,