Advantech PWS-1419T Assembly Manual page 8

PWS 1419T Side Views
Use the photo below to identify components and I/O ports that are accessible from the two
sides of the BP-10 chassis. The illustration s hows the external connectors and components of
a completely assembled SBC system. Your subassembly has only knockout holes instead.
VGA port & monitor
connector
I/O port
knockouts.
Power Fan
The ATX power switch DOES NOT turn off the AC power. To remove AC power from your
system, you must unplug the AC power cord from the AC outlet or the chassis
3 intake
fans w/
Filter
The CDROM is on the right side of the panel
CDROM
Handle bar
9 add-on card slot
(optional 12)
Internal speaker
connector
AC power Input Socket
Power switch
ATX Power switch
reset switch
Tone
Volume
3.5"
Floppy
disk.