Battery Operating Time; Receiver Operation; Getting Started - Kenwood TH-78A Instruction Manual

Fully charge
Approximate battery condition
5 Battery Operating Time (hours)
Batteries
Alkaline
Manganese
PB-13
PB-17
PB-18
•
6 seconds transmit, 6 seconds receive, 48 seconds reception with no signal recommended.
AF output 0.2W/8 ohms.
•
Battery Saver function ON.
CAUTION
The display indicator flashes and the POWER switch will not work when the battery starts to go
flat. When this happens, recharge or replace the battery pack.
We recommend use of the NiCd battery pack for long transmission or extended operation.
Manganese batteries (except Alkaline manganese batteries) may be used for Low or EL position.
RECEIVE OPERATION
1

Getting Started

Connect the battery pack and the supplied antenna.
Press the POWER switch to turn the transceiver on. One of the default frequencies should appear on the display.
If the display shows incomplete data, or you think the displayed frequency is wrong, reset the microprocessor
Memory Initialization (see page 15).
Manganese or Alkaline batteries
144 MHz
H L EL
7.5 13 36
3 3.5 11
4.5 7 20
3 7 20
7 11 31
Fully discharged
430/440 MHz
H L EL
6 10 32
2 2.5 10
3.5 5 14
2.5 5 14
5.5 8 22
Page 7