Operating Time - Kenwood TH-25A Series Instruction Manual

2-5 BATTERY VOLTAGE LEVEL METER
The S meter indicates the relative battery voltage during
transmit.
Recharge/replace the batteries when the level reaches the
low indicator.
NiCd Battery pack
MODEL| V | mAh Fully charged Fully discharged
PB-5 | 200 :
PB-6 | 5.2] 600
PB-9
PB-7 [1100
pe-8 | 12| 600 | Sooeeneoe | seeeeee
Manganese or Alkaline batteries (Approximate battery con-
dition)
New batteries | Need to replace
BT-6, 9V
2-6 OPERATING TIME
TH-25 series
Batt voltage (V) Transmitting -1 minute
Receiving
3 minutes
AF OUTPU 2Wiso
144 NiCd battery 12V
"Battery voltage is measured
at transmis-
10
NiCd battery 7.2V
for transmission
6
"a " CSSA
4 1 Manganese batt Alkaline manganese
(Low-Power) (BT-6) battery (BT-6)
NiCd battery 7.2V 600mAh (PB-6)
Manganese battery (BT-6)
NiCd battery 7.2V 200mAh (PB-5)
60 120 180 240 300 360 (minutes)
TH-45 series
Lower limit voltage range
hoy for transmission
=
See
AA
Alkaline manga
=" battery (BT-6)
p |
Manganese battery (Low-Power) (BT-6)
NiCd battery 7.2V 600mAh (PB-6)
| Manganese battery (BT-6)
NiCd battery 7.2V 200mAh (PB-5)
60 120 180 240 300 (minutes)
TH-55 series
Transmitting, <1 minute
Batt voltage (V)
Receiving
3 minutes
AF OUTPUT. .2 W/8 2
*B " t e
'ab NiCd battery 12V
pA daa
is measured at transmis-
600mAh (PB-8)
NiCd battery 7.2V 600mAh (PB-6)
NiCd battery 7.2V
1100mAh (PB-7)
Lower limit voltage range for transmission
4
battery (BT-6) (Low-Power) (BT-6) battery (BT-6)
60 120 180 240 300 (minutes)
Manganese battery (except Alkaline manganese battery) is
available for Low position.
7