Advertisement
Mounting I Montage I
n
Montagem
I
Montaggio
~~~~~~L ~;JII1...
. ..
.
~~
Before Mounting
A depth of at least 82.4 mm (3
1
/4
in) is
required to mount the woofer. Measure the
depth of the area where you are to mount the
speaker, and ensure that the speaker is not
obstructing any other components of the car.
Keep the followings in mind when choosing a
mounting location:
• Make sure that nothing is obstructing
around the mounting location of the door
(front or rear) or the rear tray where you are
to mount the speaker.
• A hole for mounting may already be cut out
of the inner panel of the door (front or rear).
In this case, you need to modify the board
only.
• If you are to mount this speaker system in
the door (front or rear), make sure that the
speaker terminals, frame or magnet do not
interfere with any inner parts, such as the
window mechanism in the door (when you
open or close the window), etc.
Also make sure that the speaker grille does
not touch any inner fittings, such as the
window cranks, door handles, arm rests,
door pockets, lamps or seats etc.
• If you are to mount this speaker system in
the rear tray, make sure that the speaker
terminals, frame or magnet do not touch any
inner parts of the car, such as the torsion bar
springs (when you open or close the trunk
lid), etc.
Also make sure that the speaker grille does
not touch any inner fittings, such as seat
belts, head rests, center brake lights, inner
covers of the rear wipers, curtains or air
purifiers, etc.
Advertisement
