Removing Wrap Arounds; Warranty & Return Policy - Easy-Lam green BA-EZ27g User Manual

Removing Wrap-arounds...
When laminating with thinner gauges of film, there is the possibility of the film wrapping around
the Pull Rollers. Use the same procedure for Cleaning the Heat Shoes and Laminating
Rollers in order to remove a wrap-around. You should remove any wrap-arounds that occur as
soon as possible. If the film is allowed to cool while wrapped around the rollers it may be more
difficult to remove and the heat shoes may have to be turned on to loosen the film.
WARRANTY AND RETURN POLICY
Warranty
Your laminator is warranted to be free of defects in material and workmanship for a period of 1
year from the date of original purchase. In the event of a defect in material or workmanship, the
manufacturer or its authorized dealer, will repair or replace (at their option) the laminator. This
does not cover rollers that have been damaged due to improper cleaning. The manufacturer
makes no other warranty stated or implied except as stated above.
Return Policy
If your laminator is not operating properly, first review the Operating Instructions and
Troubleshooting Guide. If the malfunction cannot be corrected, contact your local dealer for
instructions. Be sure to have your machine serial number and date of purchase handy. If the
laminator must be returned to the dealer, proper packaging and freight charges are your
responsibility. Shipping damage as a result of improper packaging is not covered under the terms
of this warranty.
Note:The heat shoes are hot! Use caution when cleaning
the rollers or heat shoes, or when removing wrap-arounds.
13