Starting And Stopping; Check Before Starting - Husqvarna HA 110 Operator's Manual

Check before starting

• Inspect the working area. Remove any objects that could
be thrown out.
• Check the cutting attachment. Never use blades that are
dull, cracked or damaged.
A
B
• Check that the machine is in perfect working order. Check
that all nuts and screws are tight.
• Check that the blade guard is not damaged or distorted.
(HA 110)
• Replace the blade guard if it is bent or damaged. (HA 110)
• Make sure the gear housing is lubricated correctly. See
instructions under the heading Gear housing.
• Check that the cutting attachment always stops when the
engine is idling.
• Only use the machine for the purpose it was intended for.
• Make sure that the handle and safety features are in good
working order. Never use a machine that lacks a part or
has been modified outside its specifications.
10 –
English

STARTING AND STOPPING