Table of Contents
Advertisement
Installation of filters
1
Pull out the [Allergy free filter + Triple
Filter] from the separately packed plastic
bag.
2
Detach the two nitto tapes from the filter.
3
Insert the filter into the filter case.
4
Detach two attached tapes from the plas-
ma filter.
Allergy Free Filter +
Triple Filter (Optional)
* The feature can be changed according a
type of model.
Test Running
- Check that all tubing and wiring are properly
connected.
- Check that the gas and liquid side service
valves are fully open.
Prepare remote controller
1
2
3
Plasma Filter
Remove the battery cover by pulling it
according to the arrow direction.
Insert new batteries making sure that the
(+) and (–) of battery are installed correctly.
Reattach the cover by pushing it back into
position.
!
NOTE
• Use 2 AAA(1.5volt) batteries. Do not use
rechargeable batteries.
• Remove the batteries from the remote
controller if the system is not used for a
long time
INSTALLATION
21
Advertisement
Table of Contents
