Table of Contents
Advertisement
The power connecting cable connected to the
indoor and outdoor unit should be complied
with the following specifications (UL recog-
nized or CSA certified).
AWG_"B"
Connecting cable
Connecting
Cable
"B"
- Connect the wires to the terminals on the
control board individually.
- Secure the cable onto the control board with
the cord clamp.
- Use a recognized circuit breaker between
the power source and the unit.
A disconnecting device to adequately discon-
nect all supply lines must be fitted.
Circuit Breaker(A)
Outdoor unit
Terminal block
Over 5mm
(0.2")
Power supply
cord
Cover control
*The feature can be changed according a type
of model.
2
(mm
)
Capacity(Btu/h)
18k/24k
18
Capacity(Btu/h)
18K/24k
25
Conduit panel
Connecting
cable
!
CAUTION
Provide the circuit breaker between
power source and the unit as shown by
Main power source
Air
Conditioner
INSTALLATION
15
Circuit Breaker
Use a circuit breake
or time delay fuse.
Advertisement
Table of Contents
