Disassembly; Rear Cover Removal; Service Position; Chassis Removal And Refitting - Sony FD Trinitron KV-29CS60B Service Manual

2-1. Rear Cover Removal

=>
=>
Remove the rear cover fixing screws indicated and pull the
rear cover backwards away from the set.

2-3. Chassis Removal and Refitting

To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
SECTION 2 DISASSEMBLY

2-2. Service Position

Position the chassis as indicated to access the solder side of
the PWB's. To gain access to the underside of the boards
follow the instructions on page 16. [Removal and Replacement
of the main bracket bottom plates].
When refitting the chassis ensure that the main bracket is
located in the beznet guide slots before sliding the chassis
forwards. Refit the inter-connecting leads in their respective
purse locks.
- 13 -