Step 6: Connect to Network
Connect the other end of the network cable to a Power-over-Ethernet (PoE) switch or injector.
Then, connect the PoE switch or injector to a network or PC and a power source. See example
connection diagram below.
Step 7: Access the Camera Live View
See
Accessing the Camera
screen of the camera.
Step 8: Adjust the Viewing Angle and Focus
1. Rotate the dome cover counter-clockwise and then pull to remove it.
2. Based on the live view, adjust the viewing angle and orientation of the camera.
Adjustments vary depending on model; see
Focus
on page 15 for detailed information.
Hardware Manual
Network
Ethernet Cable
Ethernet Cable
(Data)
PoE Injector /
PoE Switch
Ethernet Cable
(Data + Power)
Camera
on page 18 for more information on how to access the Live View
How to Adjust the Viewing Angle and
13
Power Cable
AC Power
Source