Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung UN32C5000 User Manual

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1 Selecting a language
2 Selecting Store Demo
or Home Use
3 Selecting an antenna
4
Selecting a channel
5
Setting the
Clock Mode
6
Viewing the
HD Connection Guide.
7
Enjoy your TV.
If You Want to Reset This Feature...
O
MENUm Setup
8
English

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the or button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the or button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold
Press the or button, then press the ENTERE button. Select Air, Cable or Auto.
Press the or button, then press the ENTERE button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel Auto Program (p. 14).
✎
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y Manual: Allows you to manually set the current date and time (p. 20).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
Plug & Play ENTERE
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
MENU for 5 sec.
Cable
ANT OUT
POWER
P