Settings
Changing radio's settings
To change the radio settings:
1. Press
to display the Source menu.
2. Press
or
to highlight Settings and then
press SELECT.
3. Press
or
to highlight a setting and press
SELECT to enter the sub-menu.
•
Repeat this step to browse for more settings
and sub-menus.
4. To change setting, press
desirable option and then press SELECT to
confirm.
Postal code
To edit the postal code for time and weather
functions.
Device info
To show the firmware version, MAC address and
PIN number of the radio. MAC address and PIN
are necessary to activate your AR Infinite Radio
accounts.
Display
To change brightness and contrast of the display.
Network setup
To change the network setting of the radio
(wired or wireless). Refer to page 11 for more
information.
Software updates
To check if newer firmware is available. Follow
the instructions on the display for update.
Weather
•
To turn on or off the text-to-speech reading
when you press the WEATHER button.
•
To select the gender and accent (US/UK) for
the voice used for text-to-speech reading.
Advanced settings
•
Clock Mode: to select between Auto Sync
and Manual for clock time update. If Auto
Sync is selected, the clock time will update
every 5 minutes while checking for weather
update.
•
Format memory: to clear all recordings in the
internal memory.
•
Reset to defaults: to reset menus to factory
defaults. The following settings will be reset:
– Username
or
to highlight a
– Password
– Display options
– Language selection
– Postal code entry
– Network connection setup
– Clock
– Alarm
– Text-to-speech options
– Demonstration mode
– Recordings in Internal Memory will NOT be
erased
•
Set Language: to change the language of the
display.
Some menus may require character
input, refer to page 16 for tips on
inputting characters.
EN
25