Settings; Changing Radio's Settings; Account Info; Device Info - Acoustic Research ARIRC600i User Manual

Settings

Changing radio's settings

To change the radio settings:
1. Press to display the Source menu.
2. Press or to highlight Settings and then
press SELECT.
3. Press or to highlight a setting and press
SELECT to enter the sub-menu.
• Repeat this step to browse for more settings
and sub-menus.
• To change setting, press
desirable option and then press SELECT to
confirm.
• Some menus may require character input,
refer to page 16 for tips on inputting
characters.

Account info

• To change the login information (username
and password) sent by the radio when
attempting to login to the MP3tunes service.
• To edit the postal code for time and weather
functions.
If you have changed your account
information through the MP3tunes'
website, please also edit the account
information in this setting. The
information here must match your account
information online.

Device info

To show the firmware version, MAC address and
PIN number of the radio. MAC address and PIN
are necessary to activate your AR Infinite Radio
accounts.

Display

To change brightness and contrast of the display.

Network setup

To change the network setting of the radio
(wired or wireless). Refer to page 11 for more
information.

Software updates

To check if newer firmware is available. Follow
the instructions on the display for update.

Weather

•
•

Advanced settings

•
– Auto Sync and Manual: to select between
or to highlight a
– Time Display: to select between 12-hour and
•
•
– MP3tunes username, MP3tunes password,
– Recordings in Internal Memory will NOT be
•
To turn on or off the text-to-speech reading
when you press the WEATHER button.
To select the gender and accent (US/UK) for
the voice used for text-to-speech reading.
Clock Mode:
automatic and manual clock time update. If
Auto Sync is selected, the clock time will
update every 5 minutes while checking online
for weather update.
24-hour display modes.
Format memory: to clear all recordings in the
internal memory.
Reset to defaults: to reset menus to factory
defaults. The following settings will be reset:
Display options, Language selection, Postal
code entry, Network connection setup, Clock,
Text-to-speech voice selections,
Demonstration mode
erased
Set Language: to change the language of the
display.
EN
27