OPERATING HAZARDS GENERAL SAFETY RULES ■ The use of the tool can expose the operator’s hands ■ For multiple hazards, read and understand the safety to hazards including crushing, impacts, cuts and instructions before installing, operating, repairing, abrasions and heat. Wear suitable gloves to protect maintaining, changing accessories on, or working hands.
consumables that are recommended by the assembly ■ Use hearing protection in accordance with employer’s power tool for threaded fasteners manufacturer; instructions and as required by occupational health do not use other types or sizes of accessories and and safety regulations. consumables.
ADDITIONAL SAFETY INSTRUCTIONS FOR PNEU- SPECIFICATIONS MATIC POWER TOOLS ■ Air under pressure can cause severe injury. Square drive 12.7 mm (1/2”) ■ Always shut off air supply, drain hose of air pressure Capacity bolt size 16 mm (5/8”) and disconnect tool from air supply when not in use, before changing accessories or when making repairs;...
2. Injuries and damage to property due to broken cutting ● It is most important that the product be properly attachments or the sudden impact of hidden objects lubricated by keeping the air line lubricator filled and correctly adjusted. Without proper lubrication during use.
■ Use the product only for its intended purpose. PROBLEM: Product runs slowly. Air flows slightly from exhaust. MAINTENANCE POSSIBLE CAUSES ■ Keep the product safe by regular maintenance. ■ Motor parts are jammed with dirt particles. ■ Always keep your air tool clean and lubricated. Daily ■...
PARTS LIST Description Description Description Description Washer Front cap Rotary controller Exhaust deflector Head Rotor O-ring 34 x 1.8 Washer Gasket Rotor blade Sealing cover O-ring 15 x 2.65 Anvil bushing Bolt 4 x 46 Spring Retaining ring Washer Cylinder Steel ball Plug cover O-ring 7.5 x 1.8...
Page 10
Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand...