Table of Contents
Advertisement
TABLE OF CONTENTS
Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment ........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................11
Installation.....................................................................................12
User controls..................................................................................13
How to adjust a setting................................................................14
Troubleshooting............................................................................19
Advertisement
Table of Contents
Related Manuals for Acer X163H
Summary of Contents for Acer X163H
-
Page 1: Table Of Contents
TABLE OF CONTENTS Special notes on LCD monitors ..........1 Information for your safety and comfort ........2 Unpacking ................... 5 Attaching/Removing the base ............ 6 Screen position adjustment ............6 Connecting the power cord ............7 Safety precaution ............... 7 Cleaning your monitor ............... -
Page 2: Special Notes On Lcd Monitors
X163H SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 3: Information For Your Safety And Comfort
X163H Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for plug as disconnecting device Observe the follwing guidelines when connecting and disconnecting power to the power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. -
Page 4: Product Servicing
X163H Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •... -
Page 5: Taking Care Of Your Vision
X163H • take short rests to relax your neck and shoulders • avoid tensing your muscles or shrugging your shoulders • install the external display, keyboard and mouse properly and within comfort able reach • if you view your monitor more than your documents, place the display at the... -
Page 6: Unpacking
X163H UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. · LCD Monitor · · · 15-pin D-Sub Cable... -
Page 7: Attaching/Removing The Base
X163H Attaching / Removing the Base Install: Remove: Align the release button on the Depress the release button as bottom of the monitor with the indicated first before removing the corresponding base and follow the arrow direction slots on the bottom of the base. -
Page 8: Connecting The Power Cord
X163H CONNECTING THE POWER CORD · Check first to make sure that the power cord you use is the correct type required for your area. · This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. -
Page 9: Power Saving
X163H Power saving The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. State Light Blue Power Saving Amber Mode The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. -
Page 10: Connector Pin Assignment
X163H CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION Green Logic Ground Blue Monitor Ground Monitor Ground DDC-Serial Data DDC-return H-Sync R-Ground V-Sync G-Ground DDC-Serial Clock B-Ground EN-9... - Page 11 X163H 24-Pin Color Display Signal Cable Meaning Meaning TMDS Data2- TMDS Data3+ TMDS Data2+ +5V Power TMDS Data 2/4 GND(return for Shield +5V hsync.vsync) TMDS Data4- Hot Plug Detect TMDS Data4+ TMDS Data0- DDC Clock TMDS Data0+ TMDS Data 0/5...
-
Page 12: Standard Timing Table
X163H Standard Timing Table To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the Auto Setup under Windows “Full Screen“... -
Page 13: Installation
X163H INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. -
Page 14: User Controls
X163H USER CONTROLS Front Panel Controls 1.Power Switch: To turn ON or OFF the power. 2.Power LED: Lights up to indicate the power is turned ON. 3.Empowering / Exit: 1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT OSD menu). -
Page 15: How To Adjust A Setting
P/X Series OSD behave When user press “MENU” button on front bezel Acer eColor Management If selected to “Acer eColor Management “ item, will appear the Acer eColor” OSD USER If selected to “USER” item, will appear the Standard OSD I. -
Page 16: Descriptions For Function Control Leds
X163H · ADJUSTING THE PICTURE The descriptions for function control LEDS Acer eColor Management Main Menu Menu Menu D escription icon icon item User defined. Settings can be fine-tuned to User mode suit any situation Optimal balance of brightness and contrast Text mode prevent eyestrain. - Page 17 X163H Main Sub Menu Menu Menu Description Item Icon Icon Adjust the horizontal position. H. Position (available in Analog mode only) Adjust the vertical position. (available V. Position in Analog mode only) Set the color temperature to warm Warm white.
- Page 18 X163H Main Sub Menu Menu Menu Description Item Icon Icon H. Position Adjust the horizontal position of the OSD. V. Position Adjust the vertical position of the OSD. OSD Timeout Adjust the OSD timeout. Select input signal from D-Sub or DVI-D or...
-
Page 19: Operation Instructions
Operation instructions Acer eColor Management Step 1: Press “ Key “ to open the Acer eColor Management OSD and access the scenario modes Step 2: Press “<“ or “>” to select the mode Step 3: Press “ Auto Key “ to confirm the mode and run Auto Adjust ·... -
Page 20: Troubleshooting
X163H TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. - Page 21 X163H (DVI Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF · Check the power switch. · Check if AC power cord is properly No Picture connected to the monitor.
- Page 22 ENERGY STAR ma ark are registered d U.S. marks ------------------------------------------------------------------------------------ Note:The statement above is applicable only to Acer LCD Monitor With an ENERGY STAR logo. This product has been shipped enabled for power management: Activate display’ Sleep mode within 15 minutes of user inactivity. Activate computer’s Sleep mode within 30 minutes of user inactivity.
-
Page 23: Declaration Of Conformity
X163 H SKU Number: X163H xxx (“x” = 0~9, a ~ z, A ~ Z or Blank) Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.