Using Your Café Series ® Mixmaster - Sunbeam Cafe Mixmaster MX8900W Instruction/Recipe Booklet

Using your Café Series
Before using your Mixmaster
Before assembling your mixer, be sure the
power cord is unplugged from the power
outlet and the speed control dial is in the
'Off' position.
1. Press the 'tilt' button, located at the top
of the neck of the mixer. While the button
is depressed, hold the handle (1) and ease
the head of the mixer back. The mixer
head will lock into this tilt position (2).
2. S elect the desired attachments depending
(1)
(2)
on the mixing task to be performed;
– B eaters for creaming butter and sugar,
plus mixing heavy cake mixes.
– W hisks for whisking cream, egg whites,
light batters and packet cake mixes.
– D ough hooks for kneading dough and
other heavy mixtures.
6
Bench Mixer
®
TILT
BUTTON
Mixmaster
®
3. I nsert selected attachment;
Beaters – select the two beaters.
Take the beater that has a pointier,
curved bottom and has a red
coloured band around the top
of the beater – illustrated as beater (A).
Insert beater (A) into the left hole on the
underside of the mixer head, the hole is
identified by a red dot beside it (3).
Take the beater with the angular/flat
bottom, illustrated as beater (B) and insert
into the remaining hole.
Note: Be sure both beaters click firmly in
place, you may need to twist the beater
slightly to engage it in position prior to
pushing it in place.
A
Whisks – select the two whisks.
Take the whisk that has a curved
bottom and has a red coloured
band around the top of the
whisk – illustrated as whisk (A).
Insert whisk (A) into the left hole on the
underside of the mixer head, the hole is
identified by a red dot beside it (4).
Take the whisk with the angular/flat
bottom, illustrated as whisk (B) and insert
into the remaining hole.
Note: Be sure both whisks click firmly in
place, you may need to twist the whisk
slightly to engage it in position prior to
pushing it in place.
B
®
A B
(3)
A B