Table of Contents
Advertisement
Welding and cutting is dangerous to the operator, people in or near the working area, and
the surrounding, if the equipment is not correctly operated. Therefore, the performance of
welding/cutting must only be under the strict and comprehensive observance of all
relevant safety regulations. Please read and understand this instruction manual carefully
before the installation and operation.
• The switching of function modes is possibly damaging to the
equipment, while the welding operation is performed.
• Do disconnect the electrode-holder cable with the equipment,
before the performance of welding.
• A safety switch is necessary to prevent the equipment from
electric-leakage.
• Welding tools should be of high quality.
• Operators should be qualified.
Electric Shock: It may be fatal
• connect the earth cable according to standard regulation.
• Avoid all contact with live components of the
welding circuit, electrodes and wires with bare hands. It is
necessary for the operator to wear dry welding gloves while he
performs the welding task.
• The operator should keep the working piece insulating from
himself/herself.
Smoke and Gas generated wile welding or cutting:
harmful to people's health.
• Avoid of breathing the smoke and gas of welding or cutting.
• Keep the working area in good ventilation.
Arc light-emission: harmful to people's eyes and skin
• Wear the welding helmet, anti-radiation glass and work
clothes while the welding operation is performed.
• Measures also should be taken to protect people in or
near the working area.
Fire hazard
• The welding splash may cause fire, thus remove flammable
material away from the working place.
• Have a fire extinguisher nearby, and have a train fire person
ready to use it.
Noise: Possibly harmful to peoples' hearing.
• Surface noise is generated while welding/cutting, the
hearing aids is necessary in some cases.
Machine Fault:
• Consult this instruction manual.
• Contact your local dealer or supplier for further advice.
WARNING
3
Advertisement
Table of Contents
