Radio Components: Umts (Optional)/Wireless Lan/Bluetooth (Optional); Switching The Radio Components On And Off - Fujitsu ESPRIMO Mobile V6505 Easy Manual

Ports and controls
Radio components: UMTS (optional)/
Wireless LAN/Bluetooth (optional)
UMTS Bluetooth Wireless LAN
The installation of a radio components not approved by Fujitsu Technology
Solutions GmbH will invalidate the certifications issued for this device
(see Section

Switching the radio components on and off

Start the WirelessSelector using the ON/OFF switch for the radio components
or the key combination
The WirelessSelector allows the radio components activated in BIOS Setup to
be switched on and off individually.
UMTS UMTS Bluetooth Bluetooth Wireless LAN Wireless LAN
If you switch off the radio components, the Bluetooth module, UMTS and wireless
LAN transmission unit (antenna) will also be switched off.
You can enable or disable the radio components individually.
The BIOS Setup allows you to specify which radio components can be switched on and off
using the ON/OFF switch for the radio components or the key combination
Only those components that have been activated in the BIOS Setup can be switched
on and off using the ON/OFF switch for the radio components or the key combination
Fn +
controlled using the ON/OFF switch for radio components or the key combination.
You can also activate and deactivate the radio components individually in the BIOS Setup.
You must have assigned the supervisor password in order for this function to be available.
Pay attention to the additional safety notes for devices with radio
components provided in the "Safety" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
14
"Technical data", Page
Fn + F1 .
F1 . Conversely, components that are deactivated in the BIOS setup cannot be
17).
► Slide the ON/OFF switch for the radio
components in the direction of the arrow
to start the WirelessSelector.
or
► Press the key combination
to start the WirelessSelector.
The radio component indicator will be
illuminated when one or more radio
components is switched on.
A26391-K248-Z220-1-7619, edition 1
+
Fn F1
Fn + F1 .