Canon EOS 30D Instruction Manual page 161

Preparation for Image Transfer
Connect the Camera to the Personal Computer
Set the camera's
<~>
switch to
<OFF>.
While the direct image transfer screen is displayed, pressing the shutter
button halfway will not return the camera ready for shooting.
Before disconnecting the cable, turn off the camera first and pull out the
cable by grasping the plug (instead of the cord).
Connect the camera to the
personal computer.
Use the interface cable that came
with the camera.
To the camera's
<
DIGITAL>
terminal,
connect the cable's plug with the
<
~
> icon facing toward the front of
the camera.
To the personal computer's USB port,
connect the plug on other end of the cable.
Set the camera's
<~>
switch to
<ON> or<r>.
On the computer, when the dialog box to select
the program appears, select [EOS Utility]
with the mouse, then click [OK]. When the
camera model selection screen appears, select
[EOS 300], then click [OK].
The [EOS Utility] screen will appear
on the computer, and the direct image
transfer screen will appear on the
camera's LCD monitor.
I
III
If the [EOS Utility] screen does not appear on the computer, see "Connect
the Camera and the Computer and then Start EOS Utility" in the Software
Instruction Manual in the CD-ROM.
161