PRESONUS Eureka User Manual page 7

3-Band Parametric Equalizer. Total tonal control is what the Equalizer
section provides. The EQ will let you fine tune the sound to suit your taste with
exacting precision.
?
Bypass Switch. A bypass switch is provided to audition the signal in an
equalized version as compared to a direct unaffected signal.
?
Variable Q. Adjusts the width of the frequency band between wide and
narrow during equalization.
?
EQ? COMP. Switches the order of the signal chain putting EQ before the
Compressor.
Master Section
?
Gain Reduction to Meter. Shows gain reduction on the meter implemented
by the compressor.
?
Level. The output of the EUREKA is adjusted by the Level control and is
useful for compensating for gain loss due to compression or to decrease
output signal that boosting frequencies with the Equalizer section may have
caused. The output is variable from –80 dB to +10 dB.
?
VU Meter. The VU meter provides an accurate reading of the output level
and a reference of signal presence. It can also be switched to monitor gain
reduction when using the compressor.
6
OVERVIEW