2: Connecting An Antenna/Cable/Vcr; 3: Preventing The Tv From Toppling Over - Sony Bravia KLV-55EX500 Operating Instructions Manual

B KLV-22EX300
• Fix the TV to the stand according to the arrow marks
that guide the screw holes using the supplied
screws.
• This TV is very heavy, so two or more people should
place the TV onto the stand.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m (15 kgf·cm).
• Ensure the AC power cord is away from screw holes
during stand installation to avoid damage to the AC
power cord.
2: Connecting an antenna/
cable/VCR
• Connecting cables are not supplied.
Connecting an antenna/cable
Antenna cable
Connecting an antenna/cable and VCR
AV cable
3: Preventing the TV from
toppling over
8
1
Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2
Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
3
Tie the wood screw and the machine screw
with a strong cord (not supplied).
z • An optional Sony support belt kit is used to secure the
TV. Contact your nearest Sony service centre to
purchase a kit. Have your TV model name ready for
reference.
Antenna cable
Antenna cable
VCR
8
5
GB