Additional Information; Installing The Accessories (Wall-Mount Bracket); Tv Installation Dimensions Table - Sony Bravia KLV-55EX500 Operating Instructions Manual

Additional Information

Installing the accessories (Wall-Mount Bracket)

To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by
Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this product.
Your TV can be installed using the Wall-Mount Bracket SU-WL500, SU-WL50B or SU-WL100 (sold separately).
• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.
• Refer to "Detaching the stand from the TV" (page 7).
• Place the TV on the stand, when securing the Mounting Hook.
SU-WL100:
Mounting Hook
Sufficient expertise is required for installing these products, especially to determine the strength of the wall for
withstanding the TV's weight. Be sure to entrust the attachment of these products to the wall to Sony dealers or
licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or
injury caused by mishandling or improper installation.

TV installation dimensions table

SU-WL100:
Screen centre point
Model name
KLV-26EX300
KLV-26NX400
KLV-22EX300
26
GB
SU-WL500:
Screw
(+PSW
4 × 12)
Square hole
Display Screen centre
dimensions dimension
A B C
672 423 97
683 436 97
551 367 133
SU-WL50B:
Screw
(+PSW
6 × 16)
Mounting Hook
Length for each mounting angle
Angle (0°)
D E
315 160
318 156
329 143
Screw
(+PSW
6 × 16)
Mounting Hook
Unit: mm
Angle (20°)
F G
262 402
264 413
222 348
H
323
328
328