Regent DSL70HB Instruction Manual page 2

DSL70HB/HW 10/13/03
Congratulations! You have just purchased a Regent dusk to dawn
neighbor friendly entry and patio lantern. This fixture will provide years
of trouble-free light for your home.
How it works
Your fixture features a light sensor that automatically turns the light on
at dusk and off at dawn.
What you need
• Hammer
• Screwdriver
• Drill with 3/16" drill bit
• Adjustable wrench
• 1/2" diameter, flexible conduit (length depends on application)
• 1/2" watertight conduit connectors
• Wire connectors (if house wire is threaded type)
• Weatherproof junction box or lampholder mounting plate
• Silicone caulk
What's included
• Fixture housing with light sensor (A)
• Lens lock screw (inserted into housing)
• Reflector (B)
• Bulb (C)
• Access cover (D)
• (2) Access cover mounting screws (E)
• (3) Fixture mounting screws (F)
• Mounting plate adapter and locknut (G)
• (3) Mounting plate adapters, screws
and nuts (H)
• Reflector mounting screws (I)
• Green ground screws (not pictured)
What to know
• For indoor and outdoor use.
• UL and cUL LISTED for wet locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any
other connection voids warranty.
• Fixture should be installed by persons with experience in household
wiring or by a qualified electrician. The electrical system, and method
of electrically connecting the fixture to it, must be in accordance with
3:52 PM Page 2
2
DSL70HB
DSL70HW
B
C
D
E
F
G
H
A
I