Getting Started; Step 1: Insert The Batteries Into The Digital Pen; Step 2: Fit The Ballpoint Pen Refill - Silvercrest DGP1000 User Manual And Service Information

Getting started

Proceed as follows to start using your digital pen quickly and easily.

Step 1: Insert the batteries into the digital pen

The warning symbol (
be inserted with the correct polarity.
Proceed as follows:

Step 2: Fit the ballpoint pen refill

Proceed as follows:
A description of how to change the refill when it is empty is given in the
"Troubleshooting" section.
Silvercrest DGP1000
) on the pen informs you that the batteries must
1. Unscrew the battery compartment cap (H).
2. Insert two batteries type Varta V392.
The plus pole (+) of both batteries must always
point upwards!
3. Screw the battery compartment cap on again.
1. Insert a new ballpoint pen refill (F) into the pen
and press it as far as possible into the pen.
Only insert a ballpoint pen refill into the pen
which has the following dimensions:
Length 67 mm; cross-section 2.35 mm
Refills can be obtained from stationery shops -
take your old refill for reference purposes.
English
11