Advertisement
11N Wall Mount Access Point / WDS AP / Universal Repeater
MAC address filtering in AP
mode
User isolation support (AP
mode)
Power-over-Ethernet
(IEEE802.3af)
Keep personal setting
SNMP Remote Configuration
Management
QoS (WMM) support
Memory
32MB SDRAM
Flash
4MB
Expansion Slots
N/A
Physical Interface
- LAN: One 10/100Mbps
- Reset Button
- Power Jack
LEDs Status
- Power/ Status
- LAN (10/100Mbps)
- WLAN (Wireless Connection)
Power
- Power Supply: 90 to 240 VDC ± 10％, 50/60 Hz (depends on different countries)
Requirements
- Active Ethernet (Power over Ethernet, IEEE802.3af)- 48 VDC/0.375A
- Device: 12V/1A
Regulation
FCC Part 15/UL, CE
Certifications
Frequency Band
2.400～2.484 GHz
Carrier sense multiple access with collision avoidance (CSMA/CA)
Media Access
2.4GH/ 2Tx2R 11N
Ensuring secure network connection
Protecting the private network between client users.
Flexible Access Point locations and saving cost
Keeping the latest setting when firmware upgrade
Helping administrators to remotely configure or manage the Access
Point easily
Enhancing user performance and density
Technical Specifications
Hardware Specification
RF Specification
EAP9550
300Mbps
AP/ WDS/Universal Repeater
Advertisement
