Part Names And Functions; Top Panel - Denon DN-S700 Owner's Manual

ENGLISH

Part Names and Functions

For buttons not explained here, see the page indicated in parentheses ( ).

Top Panel

Note that there are many buttons working two different function selected by short time pushing or long
pushing (1 second or more). The "•" mark indicates short time push function and "-" mark indicates long
time push function.
Q0 Q1
o
i
u
y
t
r
e
w
q

Q2 Q3 Q4 Q5 Q6
W1
q PLAY/PAUSE button (1 3)
• This button will start or pause playback.
• Push once to start playback, once again to
pause playback, and once more to resume
playback.
w CUE/STUTTER button
⋅ CUE (Back cue):
Pushing this button in play mode will force
the file back to the position which playback
started. While in search mode, it makes new
Cue point.
⋅ STUTTER:
In Cue mode, by pushing the
makes a Stutter sound from the Cue point.
This is called Stutter play.
e
FILTER button
The Beat filter can be selected.
r FLANGER button
The depth and delay time can be selected.
t ECHO button
The ECHO functions can be selected. The
feedback level and delay time can be selected.
Q7 y •TAP (LOCK), -AUTO/INPUT BPM button
⋅ TAP:
When you push this button repeatedly, the
Q8
Auto mode turns off and starts measuring your
Beats Per Minute (BPM) by tapping.
⋅ BPM LOCK:
When this button is pressed once while the
Auto BPM counter is operating, the data
measured by the Auto BPM counter is locked.
⋅ AUTO:
TAP
When pushing the button for 1 second,
activates AUTO BPM mode. The measured
BPM is displayed in the character section of
Q9
the display.
⋅ MANUAL INPUT:
TAP
When the button is pressed and held in
for more than 2 seconds, the BPM input mode
is set and the BPM value can be input directly
PARAMETERS
with the knob. When the
button is pressed again, the BPM input mode
is turned off.
NOTE
W0
If you select a new file, AUTO BPM mode turns on
automatically.
u EXIT/RELOOP button
Use this to exit or return back again to Seamless
loop playback. You can add variety to looping
with this function.
i CLR button
Use this to select operating mode of
from Hot Start mode.
A
If the button is pushed while pushing the
button, you can clear the selected A point.
o A button
Using this button you can create starting point
for Hot Start, Seamless Loop and Stutter.
CUE
button
Q0
B button
Use this to set the B point for to create a
Seamless Loop after the A point has been set.
Q1 •TIME button, CUE MODE button
⋅ TIME:
The display switches between "ELAPSED"
(elapsed time), "REMAIN" (remaining time),
"T.ELAPSED" (total elapsed
"T.REMAIN" (total remaining time) each time
the button is pressed.
⋅ Cue Mode: DENON* / OTHER
DENON*: When the playback is started
durnig the Play Pause mode, the
Cue point is set.
CUE
Other: When the
during the Play Pause mode, the
Cue point is set.
TAP
A
button,
CLR
time) and
button is pushed