ENGLISH
Front Panel
q
Disc loading slot
Insert CDs here. Insert the CD slowly, then
release it.
NOTE
Not compatible with 8 cm CDs. Accidental loading
of an 8 cm CD may cause a malfunction.
q
Rear Panel
q
w
e
q
Analog output terminals (LINE OUT)
• This is unbalanced RCA output terminals.
• Audio signals outputs.
w
Digital output terminal (DIGITAL OUT)
• Digital data is available from these terminals.
• Use 75 Ω/ohms pin cord for connection.
• We recommend you use braided wire type
shielded cable.
NOTE
The playback level after analog conversion is set
to –6 dB below the usual level to avoid digital
distortion.
r
e
Fader start jack
• Connect the mixer here.
The various fader commands (play, pause, cue,
etc.) are received from the mixer.
• Use a 3.5 mm stereo mini cord for connection.
r
POWER button
Push this button to turn power on and off.
NOTE
Do not turn off the power while a disc is loading or
ejecting. Doing so could damage the CD mechanism
and lead to malfunction.