Whirlpool Gas dryer Installation Instructions

Read and save
IS .
IMPORTANT:
Installer: Leave Installation Instructions
with the homeowner.
Homeowner: Keep Installation lnstructiol
for future reference.
Save Installation Instructions for local
electrical and gas inspector's I
7S
se.
How To Install Your
Gas Dryer
(This dryer is set to operate on Natural Gas.)
Before you start, make sure that
you have the following:
New metal exhaust duct. Do Not use
plastic duct. If you are using an existing
duct system, remove any lint buildup (see
Panel B, "Exhaust requirements").
All the tools you will need and parts
needed to connect gas supply to dryer
(see Panel A ).
The proper gas supply (see Panel A).
A grounded 120-volt, 60-Hz, AC-only,
15 or 20-ampere fused electrical circuit
(see Panel B, "Electrical requirements").
Proper location (see Panel A and
back cover).
Part No. 3395337 Rev. A