Dyna-Glo DGP350SNP User's Manual And Operating Instructions page 16

13. Insert the grease pan (19) into position by slid-
ing it in the grill body (9) from the rear, along the
rails located just below the underside of the grill
body (9). Insert the grease cup (20) into position by
sliding it onto the rails located on the bottom side of
the grease pan (19).
14. Remove the igniter cap by turning it counter-clock-
wise. Insert the AAA battery (21) into the igniter body
with Positive "+" end facing out. Replace the igniter
cap.
21
13
14
14
19
19
20