Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rocky Mountain RMR-8RDS
Summary of Contents for Rocky Mountain RMR-8RDS
- Page 1 RMR-8RDS Remote Radar and Laser Detector Radar and Laser Scrambler Owners Manual...
- Page 2 – the laser guns. The RMR-8RDS operation. Radar detectors are not legal in Washington D.C., Virginia or scrambling modules are full featured radar and laser scramblers most provinces in Canada.
-
Page 3: Installation
In most vehicles the best mounting location is COMPONENTS directly behind the grill through the slot openings. It should Your RMR-8RDS remote consists of the following components: have a clear view of the road ahead. Other locations that (1) Control module... - Page 4 Thoroughly investigate the location before drilling any holes. The front antenna cable plugs into the front jack on the Control module. Keep all cables away from moving parts and hot surfaces The scrambler cable from the front plugs into “AUX” jack on (Radiator, hoses, engine, etc.) the Control module.
- Page 5 Route the cable into the vehicle’s interior. Detour the cable away from moving parts and hot surfaces (Radiator, hoses, engine, etc.) and fasten secure with the Pull the cable through and plug into jack marked “Rear” on the supplied cable ties. Route the cable into the vehicle’s interior.
- Page 6 OPERATION Display Brightness Control There are four levels of brightness for the display. VOLUME DOWN & CITY BUTTON MUTE BUTTON Hold down DIM button for two seconds. Each time you hold down the DIM button for two seconds the display brightness will change (Dim, Dimmer, Dark and Bright).
- Page 7 Press the City button a third time to engage “Highway” mode. Tutorial Mode Select Tone The RMR-8RDS has a tutorial mode intended to familiarize you Press and hold the Power and City buttons simultaneously the with the various visual display and distinct audible alerts this remote will change tone sound.
-
Page 8: Care And Maintenance
Indicator and Visual CARE AND MAINTENANCE Power On: “P” LED turns on. Your RMR-8RDS remote is an example of superior design and craftsmanship. The following suggestions will help you care for X Band detection: “X” LED turns on with voice sound. -
Page 9: Troubleshooting
Try to avoid road splash or other liquids that can damage the If the remote gives false alerts when the vehicle hits bumps: Check the vehicle’s electrical system including main battery internal components and reduce the performance of the detector. Periodically check and wipe off any dirt from the front antenna cable and alternator connections. -
Page 10: Warranty
Frequency of Operation: 10.525 GHz (X Band) WARRANTY 24.125 GHz (K Band) 34.700 GHz (Ka Band) The RMR-8RDS is guaranteed against defects in workmanship RADAR Scrambler and materials for 12 months from the date of purchase. Should Frequency of Operation: 8.0-38.2 GHz... -
Page 11: Scrambler Operation
It does not transmit, but uses the police radar gun’s The Rocky Mountain Radar scramblers only allow the Lidar to own signal as a carrier of its information. see up to 100 feet so it is unable to calculate your speed. -
Page 12: Frequently Asked Questions
What is Punch-Through? The signal reflected by the car gets stronger the closer the target is to the radar gun. The Rocky Mountain Radar scrambler uses the radar signal as a carrier and reflects it through a high-gain antenna. It will work only as long as the scrambling signal is greater than the signal from the target.
Need help?
Do you have a question about the RMR-8RDS and is the answer not in the manual?
Questions and answers