Table of Contents
Advertisement
INSTALLING AND POINTING YOUR SATELLITE DISH ANTENNA
In the following procedure you will be referring to the meter on the INSTALLATION screen. If
this screen is not currently displayed, press the
press the
key to start the system up again.
If you see a black screen with the message:
"Searching for satellite signal. To access related utilities, press
press the
key. Otherwise, press keys in the following order to navigate to the
INSTALLATION screen:
•
•
or
•
•
or
•
You should see a meter displaying your signal strength.
The INSTALLATION Screen
The INSTALLATION screen shows the quality of the signal that you are receiving. Because you
The INSTALLATION screen
Pointing the Satellite Dish Antenna Using the "Box"
Method
to display the MAIN MENU
to move the highlight over the Setup Menu button
to display the SETUP MENU
to move the highlight over the Installation button
to display the INSTALLATION screen
have not adjusted the direction of your satellite dish antenna, you
probably have a signal strength of 0. To let you know that it is
"looking," you should hear a short beep every few seconds.
Even though a signal strength of 50 will give you the same high-
quality picture and sound as a reading of 90, you should maximize
your signal as much as possible, because rain or snow can cause the
signal strength to drop significantly. This signal reduction is known
as "rain fade." As soon as the signal can penetrate the rain cloud or
snow, your picture will return automatically.
Pattern of scanning the sky
key, shutting the system down, and then
."
P
4-17
AGE
Advertisement
Table of Contents
