Installation And Configuration; Finding A Location For The Printer; Figure 3 - Switches, Indicators And Connections - AMT Datasouth Fastmark 400 Series User Manual

INSTALLATION AND CONFIGURATION

Power LED
Ready LED
Feed button

Finding a Location for the Printer

Before setting up the printer you should first consider the following:
Find a solid flat surface with adequate room for the printer. Make sure there is enough room
on the top side for the media and ribbon access.
The location should be near the host or terminal. Consider the distance between host and
printer for the communication cable (serial or parallel cable)
The power adapter should be connected to a properly grounded and isolated electrical outlet.
Away from direct sun, extreme temperatures, humidity dust and debris.
On Switch

Figure 3 - Switches, Indicators and Connections

Serial Port
Power Jack
Parallel Port
User's Guide 9