Button Programming - Studiologic VMK-188 plus Instruction Manual

I n s t r u c t i o n m a n u a l
PROCEDURE: BUTTON PROGRAMMING
We will set up a BUTTON to behave like a simple ON/OFF switch, or Latch Switch. Press the BUTTON once and the Switch will be on.
Press the BUTTON again and the Switch will be off. Programming Transport BUTTONS follows the exact same procedure.
TIP: This can be very useful to control the Mutes on your Audio/Sequencing program. Most Pro and Semi Pro Audio/Sequencing
programs will allow you the option to control various functions of the program from an external controller, in this example, control-
ling the Mutes on your virtual mixer. (See your Program's manual for details.) Each BUTTON can behave like a Latch, used in this
Mute example (SWITCH MODE), or like a Momentary (PUSH MODE) switch. A Momentary switch will only function when the BUTTON
is held down. This is very useful for the Fwd BUTTON and Rew BUTTON in the Transport section.
1) PRESS EDIT
2) PRESS BUTTON
In this example Move SLIDER 1
w/Bank A Selected
(Remember: keep track of
your BANKS when programing!)
Press BUTTON (1)
3 ) PRESS PAGE UP
In this example we'll use
CTRL Change number 10.
You may adjust this to any
CTRL number you desire.
4) PRESS PAGE UP
Set the Key Note to 60.
Key range is 0-127
5) PRESS PAGE UP
SWITCH: Press button once,
a NOTE ON Message will transmit.
Switch is ON.
Press button again, a NOTE OFF
Message will transmit.
Switch is OFF.
SCREEN
CHANGE
SCREEN
CHANGE
SCREEN
CHANGE
SCREEN
CHANGE
SCREEN
CHANGE
19
b utt on s
VMK SERIES
PRESS OR MOVE
ANY CONTROLS
To adjust the Midi Channel use the DE knob
EDIT SLIDER 51
MIDI CHANNEL OFF
To adjust the CTRL Change use the DE knob
EDIT BUTTON: B1
CTRL CHANGE: OFF
To adjust the Key Note use the DE knob
EDIT BUTTON: B1
CTRL CHANGE: OFF
To adjust the Key Note use the DE knob
EDIT BUTTON: B1
KEY NOTE: SWITCH