Viking VGSU SERIES Installation Instructions Manual page 3

Vgsu series built-in gas cooktops
Hide thumbs Also See for VGSU SERIES:
Table of Contents

Advertisement

The cooktop must be electrically grounded in accordance with local codes or, in the absence of codes, with the
ANSI/NFPA No. 70-latest edition. Installation should be made by a licensed electrician. This appliance is equipped
with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a
properly grounded receptacle. Do not cut or remove the grounding prong from the plug.
For personal safety, this appliance must be properly grounded.
cut or remove the third (ground) prong from the power plug.
WOOD/COMPOSITE OVERLAY INSTALLATION
The bottom of the hood should be 30" (76.2 cm) min. to 36" (91.4 cm) max. above the countertop. This would
typically result in the bottom of the hood being 66" (167.6 cm) to 72" (182.9 cm) above the floor. Refer to the
rangehood installation instructions for further information. These dimensions provide for safe and efficient operation of
the hood.
WALL INSTALLATION
Wood/Composite Overlay
30" (76.2 cm) min
36" (91.4 cm) max
66" - 72"
(167.6 cm -
182.9 cm)
36"
(91.4 cm)
WARNING!!
ELECTRICAL GROUNDING INSTRUCTIONS
Do not under any circumstances
Metal Hood
Countertop
ISLAND INSTALLATION
30" (76.2 cm) min
36" (91.4 cm) max
66" - 72"
(167.6 cm -
182.9 cm)
36"
(91.4 cm)
3
Wood/Composite Overlay
Metal Hood
Countertop

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents