Remote Control Does Not Work - Canon LE-5W User Manual

Remote control does not work

Batteries aren't inserted properly/
Batteries are drained.
The remote control is being
operated from a place outside its
range.
There is something between the
remote control and projector.
The operating environment of the
remote control is not appropriate.
Remote control operation has
stopped because of the key lock.
Cause
Check that the batteries are inserted
correctly.
If batteries are in the remote control,
replace them with new ones. (P22)
Check that the remote control is operating
within range of the remote control receiver
on the projector. (P22)
Remove any obstructions between the
remote control receiver on the projector and
the remote control. Operate the remote
control from a position free of obstructions.
Make sure that direct sunlight and strongly
lit lamps are not shining on the remote
control receiver of the projector. (P22)
When you press the POWER button, does
the STATUS LED light up?
If lit, key lock is ON.
Press and hold INPUT on the operation
panel or the AUTO PC button on the
remote control to release the key lock.
(P74)
93
Remedy
Appendix