Crown FME 350W User Manual page 66

Crown Broadcast FME 350W to 2000W User Manual– 05/2013
15 stereo
TA/TP (RDS.MAINDSN.TATP / RDS.MAINDSN.TA / RDS.MAINDSN.TA) – read/write
With this parameter, enable or disable the TA (Traffic Announcement) / TP (Traffic Program). Enabling the
TA instantaneously switches an RDS receiver onto road information reports; at the end of the report, the
receiver will automatically go back to its former operating state. Enabling the TP shows RDS receivers that
the allocated station is likely to broadcast road information. You may enable both the TA and the TP, the TP
only, or neither.
TATP, TP or OFF
AF (RDS.MAINDSN.AF) – read/write
With this parameter, set up to 25 alternative frequencies in MHz with the method A. An RDS receiver will
shift to an alternative frequency when the set frequency is no longer properly received.
XX;XX; ...;XX
RT (RDS.MAINDSN.RT) – read/write
With this parameter, display and set the radiotext, function which enables text messages to be broadcast in
groups of 64 characters. The RDS receiver can only benefit from this function if fitted with a specific display
(home receivers, Smartphone mobile receivers). The RT function cannot be used on car radios as road
safety commissions have forbidden its use on board a vehicle.
GS (RDS.MAINDSN.GS) – read/write
With this parameter, set the group sequence (32 max) which must include at least one group 0A.
XX;XX; ...;XX
Parameters of the ALT DSN sub-menu are identical to those of the MAIN DSN sub-menu; for serial
commands, use ALT instead of MAIN.
Crown Broadcast, a division of International Radio & Electronics Corporation 25166 Leer Drive, Elkhart, Indiana, 46514-5425 USA
with compressed
Page 66
Ph +1 (574) 262 8900
dynamic