Crown FME 350W User Manual page 11

Crown Broadcast FME 350W to 2000W User Manual– 05/2013
* Two optional communication boards are available:
TCP/IP board

2 RS232 ports (COM1 and COM2)

1 µSD card

1 USB port

1 Ethernet port

1 CAN port
On the TCP/IP board, the COM1 port is used to send serial commands and the COM2 port is used for
dynamic PS tags.
CAN board

2 RS232 ports (COM0 and COM1)

1 slave USB port

1 CAN port
On the CAN board, the COM0 port is reserved for the unit's upgrade and the COM1 port is used to send
serial commands.
Crown Broadcast, a division of International Radio & Electronics Corporation 25166 Leer Drive, Elkhart, Indiana, 46514-5425 USA
Page 11
Ph +1 (574) 262 8900