Table of Contents
Advertisement
Quick Links
S P E C I F I C A T I O N S
SP5
Frequency Response
45 – 20kHz (–10dB)
Recommended Maximum
Amplifier Power †
60 watts
Impedance
8 ohms nominal
Sensitivity
87dB (2.83V/1m)
Crossover Frequency
3,000Hz
Woofer
5-1/4" titanium-laminate cone
w/rubber surround
Tweeter
1" titanium-laminate dome,
w/Elliptical Oblate Spheroidal™
waveguide and swivel mount
Plate Size (W x H)
7-1/2" x 10" (191mm x 254mm)
Mounting Cutout Size (W x H)
6-1/8" x 8-11/16" (156mm x 221mm) 7-1/8" x 9-11/16" (181mm x 246mm) 7-7/8" (200mm)
Mounting Depth
3-3/4" (95mm)
All features and specifications are subject to
change without notice.
† The maximum recommended amplifier power
rating will ensure proper system headroom to
allow for occasional peaks. We do not recom-
mend sustained operation at these maximum
power levels.
* Trademark of Dolby Laboratories.
DTS is a registered trademark of
Digital Theater Systems, Inc.
O W N E R ' S G U I D E
P R O D U C T L I N E :
SoundPoint
M O D E L S :
SP5, SP6, SP6C, SP8
D E S I G N G O A L : Combine the superior performance of traditional
JBL loudspeakers with the convenience of in-wall installation.
T W E E T E R T Y P E : Titanium-laminate-dome with EOS
waveguide, and swivel mount
W O O F E R T Y P E : Titanium-laminate cone with rubber surround
C R O S S O V E R N E T W O R K : Straight-Line Signal Path™ (SSP)
P R O F E S S I O N A L R E F E R E N C E : Studio Monitor
SP6
Frequency Response
38 – 20kHz (–10dB)
Recommended Maximum
Amplifier Power †
80 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
6-1/2" titanium-laminate cone
w/rubber surround
Tweeter
1" titanium-laminate dome,
w/Elliptical Oblate Spheroidal™
waveguide and swivel mount
Plate Size (W x H)
8-1/2" x 11" (216mm x 279mm)
Mounting Cutout Size (W x H)
Mounting Depth
3-7/8" (98mm)
We, Harman Consumer International
declare in own responsibility, that the products described in this
owner's manual are in compliance with technical standards:
EN 50081-1:1992
EN 50082-1:1997
™
Series
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
800-336-4JBL (4525) (USA only)
www.jbl.com
NOTE: For new-construction applications, be sure
™
to purchase the correct rough-in frame kit.
©2001 JBL, Incorporated.
JBL is a registered trademark of JBL, Incorporated.
Part No. 170-0035
SP6C
Frequency Response
40 – 20kHz (–10dB)
Recommended Maximum
Amplifier Power †
80 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
3,000Hz
Woofer
6-1/2" titanium-laminate cone
w/rubber surround
Tweeter
1" titanium-laminate dome,
w/Elliptical Oblate Spheroidal™ w/Elliptical Oblate Spheroidal™
waveguide and swivel mount
Plate Size
9-3/16" (233mm)
Mounting Cutout Size
Mounting Depth
4-1/4" (108mm)
Declaration of Conformity
2, route de Tours
72500 Chateau-du-Loir
France
Harman Consumer International
Chateau-du-Loir, France 8/01
P R O S O U N D
C O M E S H O M E
SP8
Frequency Response
30 – 20kHz (–10dB)
Recommended Maximum
Amplifier Power †
100 watts
Impedance
8 ohms nominal
Sensitivity
89dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
8" titanium-laminate cone
w/rubber surround
Tweeter
1" titanium-laminate dome,
waveguide and swivel mount
Plate Size (W x H)
10-1/8" x 13-1/8" (257mm x 333mm)
Mounting Cutout Size (W x H)
8-7/8" x 11-13/16" (225mm x 300mm)
Mounting Depth
4" (102mm)
Luc E. Godard
™
Advertisement
Table of Contents
Related Manuals for JBL SP5
Summary of Contents for JBL SP5
-
Page 1: Declaration Of Conformity
800-336-4JBL (4525) (USA only) www.jbl.com D E S I G N G O A L : Combine the superior performance of traditional JBL loudspeakers with the convenience of in-wall installation. NOTE: For new-construction applications, be sure ™ to purchase the correct rough-in frame kit. - Page 2 SP5, SP6, SP6C, SP8 D E S I G N G O A L : Combine the superior performance of traditional JBL loudspeakers with the convenience of in-wall installation. ™ T W E E T E R T Y P E : Titanium-laminate dome with EOS...
- Page 3 T H A N K Y O U F O R C H O O S I N G J B L For more than 50 years, JBL We’re confident that the Please take a moment to has been involved in every...
-
Page 4: Speaker Placement
S P E A K E R P L A C E M E N T Front Speakers WALL - 60 Models SP5, SP6, SP8 as Rear Speakers 5 – 6 ft. WALL WALL WALL WALL Model SP6C in Ceiling... -
Page 5: Speaker Connections
(+) and (–) terminals. Most to the amplifier than the other, manufacturers of speakers and hide the excess wire behind electronics, including JBL, use the wall. red to denote the (+) terminal and black for the (–) terminal. It is important to connect both... -
Page 6: E X I S T I N G C O N S T R U C T I O N
E X I S T I N G C O N S T R U C T I O N SP5, SP6, SP8 Level ≥1/2" ≥1/2" ≥1/2" Template Determine the correct Note: Always allow at least Remove the grille from the speaker frame. - Page 7 E X I S T I N G C O N S T R U C T I O N SP6C ≥1/2" ≥1/2" ≥1/2" Remove the grille from Determine the correct speaker Cut the drywall. the speaker frame. location. Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be...
-
Page 8: N E W C O N S T R U C T I O N
N E W C O N S T R U C T I O N You will need to purchase the correct rough-in frame kit for your model: Speaker Model Rough-in Frame Kit RIF5 RIF6 SP6C RIF6C RIF8 Detailed installation instructions are supplied with the rough-in kit. P A I N T I N G T H E S P E A K E R F R A M E A N D G R I L L E SoundPoint™...