View User Information On Usb Device; Care And Maintenance - LifeSpan BPM 1000i Owner's Manual

Digital blood pressure monitor with cuff and usb drive
Table of Contents

Advertisement

View User Information on USB Storage Device
1. The BPM1000i provides the ability to verify the user's information on the
USB drive.
2. To view the information, rotate the FUNCTION key to the
The message bar shows "USB User Info". Press OK to enter the function.
If there is no USB storage device inserted in the
USB port, the message bar will show "No USB Drv".
3. Press the
or
information including name, sex and birth date.

Care and Maintenance

Avoid high impacts or
dropping.
The cu is sensitive and must
be handled carefully. Do not
bend or twist the arm cu .
Do not pump up the unit if
the cu is not well tted.
Use a cloth moistened with
water or neutral detergent
to clean the body, & wipe it
dry. Avoid thinner, benzine,
& other harsh cleaners.
Remove the batteries, if
the unit will be not used
for a long period.
Do not modify or disassemble
the unit and arm cu . Never
open this unit.
16
keys to check all related USB
symbol.
Keep the unit in a safe
place. Avoid extreme
temperature, direct sunlight,
high moisture, and dust.
The cu is intended for use
by a single user. To clean
the cu , you can use a light
bristle brush, warm water
(do not exceed 125°F), and
mild detergent to remove
debris, stains and other
material from the outer
fabric and Velcro. Removal
of blood and other body
uid requires use of
enzymatic detergent. Do
not allow water or other
chemicals to enter the cu .
Air-dry the cu completely
prior to storing. To avoid
cross infection, it is
strongly suggested to use
an exclusive cu for each user.

Advertisement

Table of Contents
loading

Table of Contents