Measuring Your Blood Pressure; Turn On The Unit; Select The Target User; Proper Posture - LifeSpan BPM 1000i Owner's Manual

Measuring Your Blood Pressure

Turn on the Unit

Press the POWER button to turn on.
The unit starts an auto-zero calibration
Select the Target User or Insert Your IHP Compatible USB Device
1. Rotate the FUNCTION key to point at the
2. The message bar should show "Select User". Press the OK button to enter.
3. There are six users to choose from. Press the navigating
select the correct user number. The message bar should display USER-1,
USER-2 ... USER-6 in sequence.
FUNCTION key to another mode.
If you plug a USB storage device into the USB port, the information on the USB
will automatically override the user selected by the FUNCTION key and the LCD
shows "USB User "; which means that the data stored in the USB storage device
is accessed. This allows the data to be read and stored to the USB storage device.

Proper Posture

level. Relax for a few minutes before taking
your measurement, then measure in a
natural position.
10
symbol.
or keys to