Table of Contents
Advertisement
Troubleshooting Guide
The movie shooting terminates by itself.
•
If the card's writing speed is slow, movie shooting may stop
automatically. Use a card with a read/write speed of at least 8 MB per
sec. To find out the card's read/write speed, see the card
manufacturer's Web site.
@)
If the movie file size reaches 4 GB or if the movie recording time
reaches 29 min. 59 sec., movie shooting will stop automatically.
When the moviels played,cameraoperation nolsecan be heard.
•
If you operate the camera's dial or lens during movie shooting, the
respective operation noise will also be recorded. Use an external
microphone (commercially available) (p.158).
Display & Operation Problems
In the viewfinder, the AF point display speed is slow.
•
In low temperatures, the display speed of the AF points may become
slower due to the AF point display device's (liquid crystal)
characteristics. The display speed will return to normal at room
temperature.
The LCD monitor does not display a clear image.
•
If the LCD monitor is dirty, use a soft cloth to clean it.
•
In low or high temperatures, the LCD monitor display may seem slow
or might look black. It will return to normal at room temperature.
The menu screen shows few tabs and options.
•
In fully-automatic modes
(O/~),
some tabs and options are not
displayed. Set the shooting mode to
P /Tv / Av /M/B
(pAD).
247
I
Advertisement
Table of Contents
